Let's make something beautiful.

Everything you need to know in one short video. Watch it once, and you'll be punching like a pro

Read the transcript

Hi, and welcome to Hey Hobby! If this is your first time trying punch needling, you are in the right place. I'm going to show you how to set up your needle, make your first few stitches, change your color, and finish your artwork. Let's get started. Inside your kit, you will find: a punch needle tool with a wire threader, hanging supplies, a color guide with all the yarn needed for your project, printed instructions, and a pre-stretched canvas with a printed design. You will work directly on the printed, numbered side of the canvas. This is also the finished side you will see when the artwork is displayed. The loops form on the reverse side, which stays hidden against the wall. Let's thread your needle. Push the wire threader through the hollow end tip until the wire loop comes out through the top of the handle. Place the yarn through the wire loop, then gently pull the threader back through the tool. Remove the yarn from the threader. Next, pass the empty threader through the small side eye near the needle tip. Place the yarn through the wire loop again, and pull it through the side eye. Remove the yarn from the threader and leave a short yarn tail. Before your first stitch, match the number on the canvas to the same number on the color guide. Now for the first stitches. Punch the needle straight down until the handle touches the canvas. After the first punch of a new color, gently move the short starting tail to the reverse side. It can remain there and may be trimmed later if needed. The open, beveled side of the needle faces the direction of the next stitch. The small side eye, where the yarn exits, faces backwards towards the stitches you have already made. Lift the needle until only the tip barely leaves the canvas. Keep it close to the surface. Move forward about 1/8 of an inch, or 3 to 4 millimeters, which is 3 to 4 little squares on the canvas, and push the needle all the way down again. Then just continue with the same gentle rhythm: punch, lift slightly, move, and punch again. When changing direction, rotate the needle while it's still inserted in the canvas. Once you're comfortable with the motion, you can start filling in the rest of your design. Fill in directly inside each colored area using simple rows and stacking your stitches. When you've finished a colored area, cut the yarn and leave a short tail. Then remove the needle. Trimming the hidden tails is optional. If you need to correct a stitch, gently remove the yarn and try the area again. The fabric will heal itself, and you can continue to punch your stitches. Just remember: keep the yarn loose, push the tool fully down, and avoid lifting it high between stitches. That's it! Your first Hey Hobby artwork is finished and ready to hang. Take your time, enjoy the process, don't worry about making every single stitch perfect. You made this yourself, and that's the best part.

Quick tips 💡

Needle depth - Push all the way down, until the handle touches the fabric.

Stay low - Graze the needle over the fabric between stitches.

Keep yarn loose - Unwind plenty from the ball so it flows freely.

Mistakes happen - Just pull the stitches out and keep going. The fabric heals right back.

Questions? Email us at support@heyhobby.com and we're happy to help.

Ready for your next project? Browse more designs →

Frequently Asked Questions

The yarn keeps pulling out of the canvas. What can I do?

Three small things make the biggest difference:

Push all the way down. The handle should touch the canvas on every stitch.
Keep the yarn loose. Let it flow freely from the ball.
Stay low. Lift the needle only until the tip barely leaves the canvas. Lifting it high between stitches can pull loops back out.

If a few loops have already come out, gently remove the yarn from that area and punch it again. The fabric heals itself. Watch how to correct a stitch.

Which side of the canvas do I punch on?

Punch on the printed, numbered side. That is also the finished side you will see when the artwork is displayed. The loops form on the reverse side, which stays hidden against the wall.

How do I thread the needle?

Push the wire threader through the hollow end tip until the wire loop comes out through the top of the handle. Place the yarn through the loop and gently pull the threader back through the tool. Then pass the empty threader through the small side eye near the needle tip, place the yarn through the loop again, and pull it through. Leave a short yarn tail.

Watch this step in the video.

Which way should the needle face?

The open, beveled side of the needle faces the direction of your next stitch. The small side eye, where the yarn exits, faces backwards toward the stitches you have already made.

Watch the first stitches.

How do I know which yarn color to use?

Match the number printed on the canvas to the same number on the color guide in your kit.

How do I change direction or switch colors?

To change direction, rotate the needle while it is still inserted in the canvas. When you finish a colored area, cut the yarn, leave a short tail, and remove the needle. After the first punch of a new color, gently move the short starting tail to the reverse side.

Watch this part.

I made a mistake. Can I fix it?

Yes. Gently remove the yarn and try the area again. The fabric heals itself, and you can keep punching.

Do I have to trim the tails on the back?

Trimming the hidden tails is optional. Short tails can stay on the reverse side, and you can trim them later if needed.

I'm still stuck. Who can I ask?

Email support@heyhobby.com with a photo of your canvas and a few words about what is happening. A real person will help you work it out.

Ready to Make Something Beautiful?

Shop Punch Needle Kits